Features
- Excellent adhesion.
- Low shrinkage.
- Ready to use ‘no curing’.
- Physical and thermal movement accommodation.
Area of Application
- Interior (Walls and Floor).
- Exterior surfaces.
Surface Preparation
- The surface should be thoroughly cleaned.
- Sufficiently flat to permit the specified flatness of finished tiling, bearing in mind the permissible thickness of the adhesives.
- Suitable for tiling the service conditions to which it will be exposed.
Mixing
- Mix 3 parts CETFIX MTA and 1 part of water by volume to stiff consistency.
- Leave for 5 minute and remix.
- Use within 45 minutes.
Application Process
- Spread the adhesive to a required bed thickness and comb with notched trowel.
- Then start placing the marble on the surface within 15 to 20 min.
- Press the marble firmly into position with a slight twisting action.
- Clean off surplus adhesive from the marble face and between joints.
- Apply joint filler CETFIX TG after 24 hours.
Coverage
- Approximately 20-25 sqft at 6mm bedding thickness.
Packing
- 20kg
Shelf Life
- 12 months
PHYSICAL PROPERTIES @ RT(27+/- 2 degree cel)