Features
- Excellent adhesion, low shrinkage.
- Accommodate physical & thermal movements.
- Ready to use, No curing required.
- Floor can be used after 24 hours.
Area of Application
- Interiors (Walls and Floor).
- Exterior surface.
Surface Preparation
- The surface should be thoroughly cleaned.
- Sufficiently flat to permit the specified flatness of finished tiling, bearing in mind the permissible thickness of the adhesives.
- Suitable for tiling the service conditions to which it will be exposed.
Mixing
- Mix 3 parts Cetfix HTA and 1 part of water by volume to stiff consistency.
- Leave for 5 minute and remix.
- Use within 30 minutes.
Application Process
- Spread the adhesive to a required bed thickness and comb with notched trowel.
- Then start placing the tiles on the surface within 15 to 20 min.
- Press the tile firmly into position with a slight twisting action.
- Clean off surplus adhesive from the tile face and between joints.
- Joint filler Cetfix TG apply after 24 hours.
Coverage
- 20 to 25 sqft. per 20 kg bag at 6 mm bedding thickness.
Packing
- Supplied in 20 kg bag
Shelf Life
- 12 months
PHYSICAL PROPERTIES @ RT (27+/- 2 degree cel)