Features
- Under Coat over plaster or Directly on Concrete surface.
- Excellent Adhesion with substrate.
- Reduce water absorption and Crack resistant.
- Superior mat finish, Durable & easy to use.
- Economical 3 to 6 mm thickness against conventional platter 12 mm.
- Does not require curing after application.
- Ideal for Internal, External wall surface & Ceiling.
- Available in Light Grey Finish & White finish.
Area of Application
- All type of concrete surface.
- All type of plaster and concrete wall.
- Ceilings
- Inner and outer wall.
- Ideal for heritage buildings repair.
Surface preparation
- The surface should be free from loose particles and any other foreign materials.
- Remove all foreign and loose materials from the wall surface with help of emery stone, putty blade or wire brush and clean the surface with water.
Mixing
- Mix 25 kg Cetcoat UC & 6 to 6.5 liters of water to stiff consistency by using suitable mixer.
- Leave the mixture for 5 minutes for polymerization and remix.
- Use within 90 minutes. Mix the product in such quantities that it can be used in specific time.
Application
- Apply 1st coat of Cetcoat UC (3 mm thickness) using a blade/spatula on the wall with bottom to up direction.
- Apply 2nd coat of Cetcoat UC (1.5 to 3 mm thickness) after 6 to 8 hours in other direction.
- For better silky finish for interiors wall use 2nd coat Cetcoat SF.
- Allow complete drying for 3 days.
- Don’t use fine emery paper to remove application marks, take care during application to avoid mark.
Coverage
- 2.5 to 2.5 sq.ft/kg for 3mm coating thickness.
Packing
- 25kg bag
Shelf Life
- 9 months